Infrastructure

PRESSURE DIE CASTING

• PDC 1500T with Furnaces = 1 Nos
• PDC 1000T with Furnaces = 1 Nos
• PDC 600T with Furnaces = 3 Nos
• PDC 400T with Furnaces = 2 Nos
• PDC 250T With Furnaces = 1 Nos
• PDC 120T with Furnace = 1 Nos
• PDC 180T with Furnaces = 5 Nos

ALLOY MANUFACTURING

• Aluminium Alloy Spectrometer = 2 Nos
• Melting Furnaces = 15 Nos

TOOL ROOM

• Milling Machine 14 inch Quill Bed 1 mtr*.75 mtr*.75 mtr = 2 Nos
• Milling Machine 8 Inch Quill Bed 1 mtr *.75 mtr *.75 mtr = 3 Nos
• Lathes 8 Feet = 4 Nos
• Radial Drill 50 mm = 2 Nos
• Overhead Cranes = 10 Nos
• Lathe Machines 6 feet = 4 Nos
• Milling Slaughters = 8 Nos
• Hand Presses 5 Ton = 8 Nos
• Vertical Drill Machine = 5 Nos
• EDM (Sparkonix) = 4 Nos
• Shaper = 1 Nos
• Hexshaw = 1 Nos
• EDM Wire-cut = 1 Nos
• Engraving Machine= 0 1Nos

HIGH PRECISION MACHINING FACILITIES

• Auto speed auto feed tapping Machines = 4 Nos
• Multi spindle tapping Machine = 6 Nos
• Multi drill Machine = 5 nos
• VMC Siemens Control PCU 20 Bed Size 1000 mm* 510 mm* 510 mm = 1 Nos
• CNC Vertical Machining Center – BMV35 (BFW GAURAV) = 5 Nos
• VMC BFW BMV45 + (ASNI) = 4 Nos
• CNC Lathes machine fanuc japan LMW = 3 Nos
• CNC Lathes Fanuc Japan ACE = 4Nos
• CNC Lathes machine fanuc OITD Jyoti Controller = 5 Nos
• CNC Drill Tap Machining Center Fanuc OIMATE-MD = 1 Nos
• Grinding OD Machine = 1 Nos
• Grinding ID Machine = 1 Nos

PREMACHINING / MACHINING FACILITIES

• Vibrator machines 400 ltyr = 8 Nos
• Vibrator machines 120 ltr Stainless steel polish = 2 Nos
• Belt Grinders Lancers 2500 mm = 10 Nos
• Table type Grinder = 1 Nos
• Polish machines = 5 Nos
• Drill machines = 50 Nos
• Power press mankoo 50 T = 2 Nos
• Vertical Tapping Machine upto 20mm dia = 6 Nos
• Dual Spindle Tapping Machine = 1 Nos

PAINT & POWDER COATING FACILITIES

• Electrostatic Paint gun Intech = 2 Nos
• Oven 6 feet for paint = 2 Nos
• Powder coating plant with electrodstatic gun = 5 Nos
• Oven 6 feet * 6 feet * 6 feet = 5 Nos
• Dust control enviroment for paint shop = 1 Nos
• Dust control equipment for powder coating = 1 Nos
• Conyerised Drying Line = 4 Nos
• Water Purification system = 1 Nos
• Cooling Tower = 6 Nos
• Shot Blasting Tumble Type = 2 Nos
• Passivation Line = 2 Nos
• Hydraulic Power Prwess 150 T = 8 Nos
• O.D. Grinder = 1 Nos
• Shot Blasting Machine = 2 Nos
• Surface grinder bed size 9inch *18 inch = 1 Nos
• Ultrasonic Cleaning Machine Lines = 3 Nos
• Nitric Acid Cleaning Line = 1Nos

IMPREGNATION FACILITIES

• Leak Test Facility(Air Leak Testing Machine= 3 Nos + Water Submerged= 2 Nos)
• Impregnation Plant (Sealing Plant) (IMP Germany)

SUPPORT FACILITIES

• Generators 80 Kw = 8 Nos
• Voltage Stabiliezers = 12 Nos (Range 30 Kw to 200 Kw)
• Air Compressor 300 Pound Capacity = 10 Nos

Fully Equiped Test LAB & Standard QA LAB (With Temperature & Humidity Control)

We have many more machines also. 

Measuring Equipments :-

• CMM (Accurate)
• Vernier Calipers (Digital/Dial Type), Micrometers, Thread Plug Gauges, Thread Ring Gauges, Plan Plug Gauges, Receiver Gauges
• Snap Gauges, Slip Gauges, Dial Gauges, Height Gauges, Surface Plates, Air Gauges, STD. Pin Gauges, Bore Gauges, Magnetic V Blocks, Right Angle Plates
• Dial Indicators, Puppy Dials, Coating Thickness Gauge, TDS Meter, Colorimeter (Die Coat Tester)
• Inside Groove Caliper (Dial Type), Bevel Protector, Infrared Thermometre, Digital Thermometer

Lab. Equipments :-

• Hardness Tester (KOHSEIMITSU)
• Lux Meter, Moisture Meter
• Roughness Tester (Mitutoyo)
• Profile Projector, PH Meter
• Spectrometer = 2 Nos
• Micro scope, Caliper Checker
• Salt Spray Chamber
• Db Meter